Driveshafts Installation - Acura 2002 RSX Service Manual

Hide thumbs Also See for 2002 RSX:

Table of Contents

Driveline/Axle

Driveshafts Reassembly (cont,d)

1 1 . Close the ear portion (A) of the band with a

commercially available boot band Drncers

Kent-Moore J-359i 0 or equivalent {B).

Check the clearance between the closed ear ponion

of the bands. lf the clearance is not within the

standard, close the ear ponion of the bands fariher.

6.0 mm (0.24 in.l MAX

3.0 mm {0.12 in.l MAX

Driveshafts Installation

1. lnstall a new set ring onto the set ring groove of the

driveshaft (left driveshaft).

Apply 0.5 1.0 g (0.02 0.04 oz) of grease to the

whole splined surface (A) of the right driveshaft.

After applying grease, remove the grease from the

splined grooves at intervals of 2 3 splines and

from the set ring groove (B) so that air can bleed

from the intermediate shaft.

Chapters

Table of Contents