Acura 2002 RSX Service Manual page 1290

Hide thumbs Also See for 2002 RSX:

Table of Contents

Power Windows

Driver's Window Motor Test

Remove the driver's door panel (see page 20-4).

Disconnect the 6P connector (A) from the driver's

window motor.

T e r m i n a l s i d e o f

m a l e t e r m i n a l s

Test the motor in each direction by connecting

batlery power and ground according to the table.

To prevent damage to the motor, disconnect

one lead as soon as the motor stops running.

lf the motor does not run or fails to run smoothly,

Pulser Test:

1. Reconnect the 6P connector to the window motor.

and reconnect the l4Pconnectortothe power

window master switch.

2. Check for voltage between the terminals.

. There should be battery voltage between the No.

6 ( + ) a n d N o . 4 ( - ) t e r m i n a l s w h e n t h e i g n i t i o n

switch is turned ON (ll).

. Connect an analog voltmeter between the No.5

( + ) a n d N o . 4 ( - ) t e r m i n a l s . a n d r u n t h e w i n d o w

motor down or up. The voltmeter needle should

move back and forth alternately (a digital

voltmeter should show the average voltage

between 0 5 V).

. Connect an analog voltmeter between the No. 3

( + ) a n d N o . 4 ( ) t e r m i n a l s , a n d r u n t h e w i n d o w