Acura 2002 RSX Service Manual page 1385

)
1 4 .
12. Disconnect SRS unit connector C (18P)from the
S R S u n i t ( A ) .
Disconnect the special tool from the cable reel 4P
connecror,
Check resistance between the No.7 terminal of
SRS unit connector C (18P) and body ground,
between the No. 16 terminal and body ground.
between the No. 6 terminal and body ground, and
between the No. 15 terminal and body ground.
There should be an oDen circuit, or at least 1 M 0 .
SRS UNIT CONNECTOR C Il8PI
ls the resistance as specitied?
YES Faulty SRS unit; replace the SRS unit (see
p a g e 2 3 - 1 3 8 ) . 1
NO Go to step 15.
)
)
t 5 .
I O .
Disconnect the cable reel from the dashboard wire
harness.
Check resistance between the No, 7 terminal o{
SRS unit connector C (18P) and body ground,
between the No. 16 terminal and body ground,
between the No. 6 terminal and body ground, and
between the No. l5 terminal and body ground.
There should be an open circuit, or at least 1 M Q .
ls the resistance as specified?
YES - Replace the cable reel.1
NO ReDlace the dashboard wire harness.l
23-39