Acura 2002 RSX Service Manual page 1079

Openers
Hatch Handle Replacement
NOTE: Put on gloves to protect your hands.
1. Remove the hatch trim panel lsee page 20-53).
2. Using a flat-tip screwdriver wrapped with
protective tape, gently pry out the hatch handle
cover (A)to detach the hook (B)from each side.
Fastengr Location3
a : N u t , 2
Remove the nuts, and pull the hatch handle (C) out
through the hole of the hatch. Take care not to bend
the hatch opener cable (D).
20-112
4. Disconnectthe hatch openercable (A)from the
hatch handle (B), then remove the handle.
Install the handle in the reverse order of removal.
and note these items:
. Make sure the hatch opener cable is connected
securely.
. Make sure the hatch opens properly.