6. Release the hook (A), and unzip the s6at-b8ck cover
(B). Pull the side airbag harhess (C) and the OPDS
harness (D) (passenger's seat) out through the
holes (E) in the seat cushion cover. The passenger's
seat is shown, the driver's seat is symmetrical
exceDt it has no OPDS harness.
Remove the side airbag lsee page 23-131), and
release the hooks (A) from the airbag module
h o l d e r ( B ) .
7 .
8. Pull back the edge ofthe seat-back cover (A)allthe
way around, and release the clips {B), then remove
the seat-back cover.
(cont'd)
20-77