Acura 2002 RSX Service Manual page 662

Automatic Transmission
1 .
2 .
A/T Clutch Pressure Control Solenoid Valve A Replacement
Remove the air cleaner housing.
Disconnect the A,/T clutch pressure control solenoid
valve A connector.
3. Remove the mounting bolts and the A,/T clutch
pressure control solenoid valve A.
4. Remove the ATF pipe {B), ATF joinl pipes (C}, O-
r i n g s ( D ) , a n d g a s k e t ( E ) .
x 1 . 0 m m
14-130
5. Clean the mounting surface and fluid passage of
the A[/T clutch pressure control solenoid valve A
and transmission housing.
6. Clean the filter of the ATF joint pipes.
7. lnstall the new gasket on the transm ission housing,
and install the ATF pipe and ATF joint pipes.
8. Install the new O-rings over the ATF joint pipes.
9. Install the new 4,,/T clutch pressure control solenoid
valve A.
10. Check the Ay'T clutch pressure control solenoid
valve A connector for rust, dirt, or oil, then connect
it securely.
1 1 . I n s t a l l t h e a i r c l e a n e r h o u s i n g .