Fuel Fill Door
Adjustment
1. Slightly loosen the hinge mounting botts (A).
A
6 x 1 . 0 m m
9.8 N.m
11.0 kgf.m, 7.2lbf.ftl
2 .
4 .
Adjust the fuel fill door (B) in or out until it's flush
with the body, and up or down as necessary to
equalize the gaps.
Tighten the hinge mounting bolts.
Check that the fuel fill door opens properly and
locks securely. and check that the rear of the door is
flush with the body.
20-96
5. Apply multipurpose grease to each location
indicated bv the arrows.
Apply body paint to the hinge mounting bolts and
a r o u n d t h e h i n g e s .
t'ei!;