Acura 2002 RSX Service Manual page 1363

)
J
I
Disconnecting System Connectors
Before removing a front airbag. side airbag or other SRS related devices (the SRS unit, the cable reel, the front impact
sensor, the side impact sensors, the seat belt buckle tensioners, and the seat belt tensioner connector), disconnecting
connectors from related devices, or removing the dashboard or the steering column, disconnect the airbag connectors
or the side airbag connectors to prevent accidental deployment.
Tu rn the ignition switch OFF and disconnect the negative cable from the battery, and wait at least 3 minutes before
beginning the following procedures.
. Before disconnecting the SRS unitconnectorC ('l8P) (A)fromthe SRS unit, dlsconnect the driver'sairbag 4P
connector (C), the front passenger's airbag 4P connector (D), the left side seat belt tensioner 2P connector (F), and
the right side seat belt tensioner 2P connector (G).
. Before disconnecting the floor wire harness lSPconnector(l) fromthe SRS unit, disconnect both sideairbag 2P
connectors (L, M) and both seat belt buckle tensioner 4P connectors (J, K).
. Before disconnecting the cable reel 4Pconnector(B), disconnectthe driver'sairbag 4P connector (C).
. Before disconnecting the floor wire harness 4P connector (E), disconnect both seat belt tensioner 2P connectors (F.
c).
(cont'd)
, J
23-17