Acura 2002 RSX Service Manual page 1017

lnterior Trim
Trim Removal/lnstallation - Rear Side Area
NOTE:
. Put on gloves to protect your hands.
. When prying with a flat-tip screwdriv€r, wrsp it with protective tape to prsvent damage.
. Take care not to bend or scralch the trim and osnels.
1. Remove these items. and remove the trim as shown:
. Rear seat-back and seat cushion lsee page 20-821.
. Rear seat-back pivot bracket (see page 20-83).
. Door silltrim (see page 20-49).
2. Installthe trim in the reverse order of removal, and note these items:
. Replace any damaged clips.
. Make sure the connectors are plugged in properly.
. When installing the rear side trim panel, make surs there are no pinches in the belt.
. Apply liquid thread lock to the rear seat-back pivot bolt before installation.
Factengr Locations
A > : C l i p , 6 B > : C l i p . 1
M T K J / t \
slltr =w
D > : Clip,2
t 5 , .
-\ssisrt
I
): Clip,
M
20-50
DOOR SILL TRIM