Cleaning Around The Bottom Of Heads - Oce CS9065 User Manual

Step 3 : Clean the area around the caps with a polyknit wiper.
Step 4 : Press the [ENTER] key in the active display (=WiperClean menu)
The head will cap in and be locked.

7.2.1.2 Cleaning around the bottom of heads

Procedure (5 steps) :
Step 1 : Open the left maintenance covers by removing the four screws.
Step 2 : Power ON the printer and go to the "WiperClean-Menu", DON'T press enter when in it.
This will cause the unlocking of the carriage.
Step 3 : Slide the carriage into the left maintenance area.
1 = Gloves
2 = Polyknit wiper
* WiperClean *
Changed Wiper?
* WiperClean *
Changed Wiper?
176
→ ENTER
→ ENTER
Chapter 7 : Maintenance
End of the procedure
AP-75037, Rev. 1.1, 24/04/2006