Error Messages; Status Messages - Oce CS9065 User Manual

6.3 ERROR MESSAGES

This chapter explains the messages displayed on the operation panel both when the printer works normally
and when an error occurs, and possible solutions.

6.3.1 Status messages

The following are the status messages while the printer works normally.
(1) Displays the operational status (1)
The following operational status is displayed on the first line of the operation panel.
No. Display
1 Ready to print
2 Media End
3 Receiving
4 Converting
5 Printing
6 Warning Waste Ink
Tank
7 Warning Ink Tube Life
(2) Displays of the operational status (2)
The following operational status is displayed between the first and the third line of the operation panel.
No. Display
1 Ink Refill **min
2 During cleaning **min
3 Media Initial ********
4 During discharge
Wait for a while
5 During washing
Wait for a while
Ready to print
Heaters
Cut&Feed
User1
Solutions
Waiting for the next operation. (Media has been
loaded.)
The printer is waiting for the next operation.
(No media has been loaded into the printer.)
The printer is receiving data.
The printer is converting data.
The printer is printing.
Replace the waste liquid tank.
Contact the Océ representative where you bought
the printer or OCÉ's technical support center.
Ink Refill
Wait for a while
Solutions
The printer performs ink charging. Wait for a while.
The printer performs head cleaning. Wait for a
while.
The printer performs initial setting of media.
Wait for a while. Indicates the media type setting
made.
The printer performs head cleaning and ink
discharging. Wait for a while.
The printer performs a head cleaning.
Wait for a while.
167
Chapter 6 : Troubleshooting
Cleaning
LeverUp
xxxm
AP-75037, Rev. 1.1, 24/04/2006
References
-
Refer to 'Media
handling'
-
-
-
Refer to 'Replacing
the waste liquid tank'
-
References
Refer to 'Installing
ink cassettes'
Refer to 'Head
cleaning'
Refer to 'Setting
media type'
Refer to 'Changing
Ink Types'
Refer to 'Changing
Ink Types'