Write Mode Menu - Oce CS9065 User Manual

5.4.5.11 Write mode menu

To set writing method of printing data to the hard disk and printing method.
Notes :
•
•
Current parameter →
Setup items Parameters
Writing <Off>
Writing/Printing
Printing after writing
Writing only
-
Write mode menu is NOT displayed if no hard disk has been installed on the
product.
When writing printing data to the hard disk, be sure to set media in the tray.
The printing data is sized to fit the media.
If there is no media in the tray, the printing data cannot be written to the harddisk.
* WriteMode *
F1 →
OFF
F3 →
Write>Prn
- OFF -
Write.Prn
WriteOnly
(1/1)
Description
No writing to the hard disk. Performs printing
immediately.
Prints while writing the data to the hard disk.
Prints after writing the data to the hard disk.
Writes the data to the hard disk without printing.
To shift to the previous menu.
Refer to File management setup menu
126
Chapter 5 : Handling the printer
← F2
← F4
Note:
Printing method can be set for
printing data saved on the hard
disk by Re-print menu.
Refer to 'Re-print menu'
AP-75037, Rev. 1.1, 24/04/2006