3.3.5 Removing the protective packaging material
Caution :
•
Caution :
•
Remove all protective packaging material according to the following procedure.
Procedure :
PART 1 : Removing tape and anti-rubbing materials (2 steps)
Step 1 :
Remove tape from all parts of the product.
Step 2 :
Remove the two anti-rubbing materials (1) on top of the main unit. (See image below)
Be careful not to pinch your fingers when opening and closing the front cover.
Remove the head locker BEFORE powering on the printer !
1 = Anti-rubbing material
35
Chapter 3 : Setting up the unit
End of part 1
AP-75037, Rev. 1.1, 24/04/2006