Printer Status; Setup Menu Display - Oce CS9065 User Manual

2.4 PRINTER STATUS

The status of the printer is explained below.
2.4.1 Normal
Indicates that the printer can receive print data when media has been loaded.
You can also change printer settings using the operation panel.
The contents displayed on the LCD monitor of the operation panel is as follows.
No. Position
1 1st line
2 Left of 2nd line
3 Right of 2nd line
4 Left of 3rd line
5 Right of 3rd line
6 Left of 4th line
7 Right of 4th line

2.4.2 Setup menu display

In the setup menu, changes can be made to the printer settings.
The contents displayed on the LCD monitor of the operation panel is as follows.
No. Position
1 1st line
2 Left of 2nd line
3 Right of 2nd line
4 Left of 3rd line
5 Right of 3rd line
6 4th line
1 → Ready to print
2 → Heaters
4 →
Cut&Feed
6 → User 1
Description
Displays the current status of the printer. Depending on the status, the
contents may be displayed in 2 to 4 lines.
Displays the function assigned to [F1] key.
Displays the function assigned to [F2] key.
Displays the function assigned to [F3] key.
Displays the function assigned to [F4] key.
Displays the currently set media type.
Displays the approximate amount of remaining media that is currently
set. (Units: m)
However, the amount is displayed only when either "Roll media 1",
"Roll media 2", or "Roll media 3" has been selected in the Roll media
setting menu.
1 →
* SetupMenu *
2 → InkStatus
4 → TestPrint
Description
Displays the setting menu name currently set.
Displays the function assigned to [F1] key.
Displays the function assigned to [F2] key.
Displays the function assigned to [F3] key.
Displays the function assigned to [F4] key.
Displays the currently available functions of the [F1] key to the [F4]
key.
Displays the page status if there are multiple pages for the currently
displayed setting menu.
Cleaning
Lever Up
xxxm
OriginSet
MediaSet
(1/7)
22
Chapter 2 : Product Overview
← 3
← 5
← 7
← 3
← 5
← 6
AP-75037, Rev. 1.1, 24/04/2006