Step 6 :
Insert the moistened wiper with a pair of tweezers as shown on the image below.
Step 7 :
Push the wiper until it clicks in the wiper holder. (See image below)
Step 8 :
Close the front cover and press the [ENTER] key in the active display (=WiperClean menu)
The head will cap in and be locked.
Note :
•
•
* WiperClean *
Changed Wiper?
Be careful not to break the lips of the wiper arm while installing the wipers.
Do not touch the wipers with your bare hands to avoid fat or dirt get in contact
with the wipers and the nozzle plate. Use a pair of tweezers to avoid this.
180
→ ENTER
Chapter 7 : Maintenance
AP-75037, Rev. 1.1, 24/04/2006