Distance Adjustment - Oce CS9065 User Manual

5.3.5 Distance adjustment

Depending on the thickness of media, the media feed amount will change. Printing results may show
following symptoms:
Overlapped printing images
White lines on printing image, etc
For above cases, adjust distance adjustment value using following procedures :
Step 1 :
Display Distance adjustment menu on the operation panel by following "Menu setup on the
operation panel".
The following messages are displayed on the operation panel.
Step 2 :
Select an item and press the [F1] or [F3] Key.
Setup items Key
Dist. Adj. F1
F3
The following messages are displayed on the operation panel.
Print the information on the selected menu.
* Dist. Adj *
F1 → Print 1
F3 →
Print 2
Parameters
Print 1
Print 2
* Dist Adj *
Printing
Change
Description
Perform printing by media feed compensation at ±
0.10% intervals of setup value from the current
parameter.
Perform printing by media feed compensation at ±
0.02% intervals of setup value from the current
parameter for fine adjustment.
→ CANCEL
86
Chapter 5 : Handling the printer
AP-75037, Rev. 1.1, 24/04/2006