Rename Menu - Oce CS9065 User Manual

5.4.5.14 Rename menu

To change file name of printing data saved in the hard disk.
Notes :
•
•
Setup items Parameters
Rename File name
Setup items Parameters
File name to be Characters you want to change
changed
Characters you can use are :
A-Z or 0-9
-
Rename menu is displayed if a hard disk has been installed.
The file name of printing data sent from the computer is always set to
"TEMPFILE000".
To save transmitted image data, change the file name to a name of your choice in
the Rename folder before transmitting the next printing data.
* Rename *
F1 → ← TEMPFILE000
F3 → →
SELECT
* TEMPFILE000 *
F1 → ← TEMPFILE000
F3 → →
[T]
JKLMNOPQRS+UVWXYZ01234
→ ENTER
Description
To select the file to be changed by operating the
following keys.
• [F1] key: Selects file name with back feed way.
• [F3] key: Selects file name with forward feed way.
• [ENTER] key: Confirms setup value. The following
messages are displayed on the operation panel.
• [CANCEL] key: Cancels setup value, shifts to the
previous menu.
Refer to File management setup menu
→
→
Description
To select characters you want to change by operating
the following keys.
• [F1] key: To select characters you want to change
with back feed way.
• [F3] key: To select characters you want to change
with forward feed way.
To select the characters to be changed by operating
following keys.
• [F2] key: Selects characters to be changed with
back feed way.
• [F4] key: Selects characters to be changed with
forward feed way.
• [ENTER] key: Confirms the new name, shifts to
the previous menu.
• [CANCEL] key: Cancels the new name, shifts to
the previous menu.
Refer to File management setup menu
129
Chapter 5 : Handling the printer
← F2
← F4
AP-75037, Rev. 1.1, 24/04/2006