Print And Wipe Menu; Smart Top Menu; Auto Cleaning Menu - Oce CS9065 User Manual

5.4.5.6 Print and wipe menu

To take care of possible condensation on the head nozzle plate, it is possible to wipe while printing.
Setup items Parameters
Print and Wipe OFF
High
Middle
Low
-

5.4.5.7 Smart top menu

This feature will take care of a feed of 5 centimetres before every print. To start printing on media which is
pre heated.
Setup items Parameters
Smart Top Off
ON
-

5.4.5.8 Auto cleaning menu

Printer performs an automatic cleaning before or during printing. Or during an idle period of 1 hour of more.
Setup items Parameters
Auto Clean Waiting
Printing
Before Printing
-
*Prn + Wipe*
OFF – Low
F2 , F4
* SmartTop *
F1 → Off
-Off-
Description
No media feed of 5 centimeters
A media feed of 5 centimeters
• [CANCEL] key: to shift to the previous menu.
Refer to Utility menu
* AutoClean *
F1 → Waiting
F3 →
BeforePrint
Description
To perform a little, normal, powerful cleaning while printer is idle
for 1, 2, 3, 4, 5, 6, 9, 12, 18, 24 hours.
To perform a little, normal, powerful cleaning after 5, 10, 15, 20,
30, 45, 60, 90, 120, 150,180 minutes of printing.
To perform a little, normal, powerful cleaning before every job
• [CANCEL] key: to shift to the previous menu.
Refer to Utility menu
+
OFF -
→ ENTER
Description
No wiping during printing
After printing 10 passes, wiping cycle will be
performed.
After printing 16 passes, wiping cycle will be
performed.
After printing 22 passes, wiping cycle will be
performed.
• [CANCEL] key: To shift to the previous menu.
Refer to Setup menu
ON
(1/1)
Printing
(1/1)
123
Chapter 5 : Handling the printer
← F2
← F2
AP-75037, Rev. 1.1, 24/04/2006