Format Menu - Oce CS9065 User Manual

5.4.5.15 Format menu

To perform formatting of the hard disk.
Notes :
•
•
Current parameter →
Setup items Parameters
Format No
-
Yes
Setup items Parameters
Format Format will be performed.
OK?
Format menu is displayed if a hard disk has been installed.
If formatting of the hard disk is performed, all data saved on the hard disk will be
deleted.
* Format *
F1 → No
- No -
* Format *
Format Harddisk
ENTER or
Yes
(1/1)
Description
Format is not performed.
• [CANCEL] key: Cancels setup value, shifts to the
previous menu.
Refer to File management setup menu
To perform formatting.
CANCEL
Description
•[ENTER] key:
• Product starts formatting.
•The following messages are displayed on the
operation panel.
* Format *
Format HardDisk ....
• After formatting, to shift to the previous menu.
Refer to File management setup menu
• [CANCEL] key
• Formatting will not be performed.
• To shift to the previous menu.
Refer to File management setup menu
130
Chapter 5 : Handling the printer
← F2
AP-75037, Rev. 1.1, 24/04/2006