Re-Print Menu - Oce CS9065 User Manual

5.4.5.12 Re-print menu

Set following items when you want to draw printing data saved on the hard disk.
• File name
• Printing media number
Notes :
•
•
Setup items Parameters
Re-print File name
Number: 0 to 99
-
Re-print menu is displayed if a hard disk has been installed on the product.
When reprinting the printing data,
•
Use media of the same size as the printing data.
The size of the printing data will be the same as the initial paper size, even if
paper of a different size has been set, the printing will start from the same
printing start position.
•
Use a cassette with the same colour and type of ink that will be used during the
printing data write.
If an ink cassette with different colours or type is used, it will not print correctly.
* Reprint *
F1 → ← TEMPFILE000
F3 → →
Select
+
0num -
→ ENTER
Description
To select file name to be printed by operating the
following keys.
• [F1] key: to select file name with back feed way.
• [F3] key: to select file name with forward feed way.
To change printing media number by operating the
following keys.
• [F2] key: Increases the setup value.
• [F4] key: Decreases the setup value.
[ENTER] key:
• To confirm setup value.
• Product starts printing.
Ready to Print
Heaters
Cut&Feed
User1
• After printing, shifts to normal condition.
[CANCEL]key: Cancels the setup value, shifts to the
previous menu.
Refer to File management setup menu
127
Chapter 5 : Handling the printer
← F2
← F4
AP-75037, Rev. 1.1, 24/04/2006
Cleaning
LeverUp
xxxm