User Media Menu - Oce CS9065 User Manual

5.4.2.6 User media menu

Setup items Parameters
User media 1-8 Amount of ink
(1/3)
InkDryTime
HeadHeight
Stiff
User media 1-8 Thickness
(2/3)
Heater
Drier
Fixer
User media 1-8 Post Fixer
(3/3)
HStatus
Dist.Adj
* User 1 *
F1 → ThinOut
F3 → HeadHeight
* User 1 *
F1 → Thick
F3 → Drier
* User 1 *
F1 → Post Fixer
F3 → Dist. Adj
InkDryTime
Stiff
(1/3)
Heater
Fixer
(2/3)
HStatus
(3/3)
Description
Sets the amount of ink discharged while printing according
to the media type.
Refer to Ink amount menu
In order to let the ink for the printing dry, the time between
the end of the print and the beginning of the next print has
to be set.
Refer to InkDry menu
Sets the distance (head height) between the print head and
the media.
Refer to Head Height menu
Makes the setting for the absorbing power of the media to
the printing board depending on the hardness of the media.
Refer to Stiffness menu
Makes the setting on the width of the media to be used. →
Refer to Thickness menu
Sets the temperature of the Heater.
Refer to Heater Menu
Sets the temperature of the Drier.
Refer to Drier Menu
Sets the temperature of the Drier.
Refer to Fixer Menu
Sets the temperature of the Drier.
Refer to Post Fixer Menu
Checks the temperature of heating elements.
Refer to HStatus Menu
Performs various settings for media feed compensation. →
Refer to Media feed compensation menu
95
Chapter 5 : Handling the printer
← F2
← F4
← F2
← F4
← F2
AP-75037, Rev. 1.1, 24/04/2006