Change The Heater Temperature; Change The Fixer Temperature; Change The Post Fixer Temperature - Oce CS9065 User Manual

5.5.1.1 Change the heater temperature

To change the temperature of the heater, press the [F1] key on the operation panel. The display will mention
the following:
Press the [F2] key to decrease the temperature.
Press the [F4] key to increase the temperature.
Press the [ENTER] key to confirm the requested temperature change.
Press the [CANCEL] key to leave the menu without changing the heater settings.

5.5.1.2 Change the fixer temperature

To change the temperature of the fixer, press the [F2] key on the operation panel. The display will mention
the following:
Press the [F2] key to decrease the temperature.
Press the [F4] key to increase the temperature.
Press the [ENTER] key to confirm the requested temperature change.
Press the [CANCEL] key to leave the menu without changing the heater settings.

5.5.1.3 Change the post fixer temperature

To change the temperature of the post fixer, press the [F3] key on the operation panel. The display will
mention the following:
Press the [F2] key to decrease the temperature.
Press the [F4] key to increase the temperature.
Press the [ENTER] key to confirm the requested temperature change.
Press the [CANCEL] key to leave the menu without changing the heater settings.
* Heater (A) *
OFF – 50°C
F2, F4 → ENTER
* Fixer (B) *
OFF – 70°C
→ ENTER
F2, F4
* Post Fixer (C) *
OFF – 70°C
→ ENTER
F2, F4
146
Chapter 5 : Handling the printer
+ ← F2
50°C - ← F4
+ ← F2
50°C - ← F4
+ ← F2
50°C - ← F4
AP-75037, Rev. 1.1, 24/04/2006