Step 4 :
Clean the edges of the heads with a swab (1) wetted by Eco-solvent cleaning fluid as shown on
the image below.
Caution :
•
•
Step 5 :
Press the [ENTER] key in the active display (=WiperClean menu)
The head will cap in and be locked.
Make sure you do not touch the nozzle plate; this would lead to poorer print
quality.
We recommend to wear gloves (2) (See below)
1 = Swab
2 = Gloves
* WiperClean *
Changed Wiper?
→ ENTER
End of the cleaning around the bottom of the heads procedure
177
Chapter 7 : Maintenance
AP-75037, Rev. 1.1, 24/04/2006