5.4.3.16 Online time out menu
To set time from the moment of receiving termination of printing data sent by computer to the recognition of
end of printing data.
Setup items
Parameters
OnlineTimer
OFF/2sec. - <30sec.> -800sec.
5.4.3.17 Overwrite menu
To set the printing method for areas where figures overlap on the printing data.
Current parameter →
Setup items
Parameters
Overwrite
<Last>
Mix
-
* OnlineTimer *
OFF – 800sec
F2, F4
* Overwrite *
F1 →
Last
- Last -
+
30sec -
→ ENTER
Description
To change the Online time out time by operating the
following keys.
• [F2] key: Increases the setup value.
• [F4] key: Decreases the setup value.
• [ENTER] key: Confirms the setup value, shifts to the
previous menu.
• [CANCEL] key: Cancels the setup value, shifts to
the previous menu.
Refer to Command setup menu
Mix
(1/1)
Description
The colour of the print created afterward is given
priority.
The colours of overlapping areas are mixed and
printed.
To shift to the previous menu.
Refer to Command setup menu
111
Chapter 5 : Handling the printer
← F2
← F4
← F2
AP-75037, Rev. 1.1, 24/04/2006