Loading Roll Media; Installing The Media Roll - Oce CS9065 User Manual

4.6.2 Loading roll media

4.6.2.1 Installing the media roll

Procedure (7 steps) :
Step 1 : Determine the printable side of the media roll (inside or outside printing) and lay down the media
roll as shown in the images below.
Step 2 : Position the media roll in the middle of the printing space. Use the numbers indicated on the roll
unit bar to position the media roll. (See image below)
Step 3 : Position the roll units of the unwinder in such a way that the media roll can be placed in between.
Next step on next page
1 = Media roll
2 = Numbers on the roll unit bar
1 = Roll unit handle
2 = Roll unit
3 = Media roll
57
Chapter 4 : Preparing for a job
AP-75037, Rev. 1.1, 24/04/2006