Introduction; Printing Flow - Oce CS9065 User Manual

5.1 INTRODUCTION

This chapter explains how to handle your printer.

5.2 PRINTING FLOW

The following flow chart illustrates the procedure for printing with the printer.
Refer to each item as necessary.
Notes :
•
Step 1 : Create the printing data.
Using software application, create the
print data.
Step 2 : Power on the printer and load
the media into the printer.
See 4.6 Media handling (page 53)
See 5.3 Using media (page 84)
for more information.
Step 3 : Select the preferred settings
for printing with the printer.
See 5.4 Menu setup on the operation
panel (page 88)
for more information.
Step 4 : Start printing
See 5.5 Operating from the operation
panel (page 145)
for more information.
Do not open the front cover during printing. Doing so may stop the printer to print.
Though the printer resumes printing after you close the front cover, a continous
print quality cannot be guaranteed.
↓
↓
↓
83
Chapter 5 : Handling the printer
AP-75037, Rev. 1.1, 24/04/2006