Interlace Setup Menu; Printing Direction Menu; Repeat Printing Menu - Oce CS9065 User Manual

5.4.3.4 InterLace Setup menu

To set the over printing method (interlace method) for printing.
Current parameter →
Setup items Parameters
Interlace method 1 pass
1 pass Few
2 pass
4 pass
-

5.4.3.5 Printing direction menu

To set print head moving direction for printing.
Current parameter →
Setup items Parameters
Direction UniDir
BiDir
-

5.4.3.6 Repeat printing menu

To make settings for the repeat print.
Setup items Parameters
Repeat Times
Interval
-
* Interlace *
F1 → 1pass
F3 → 2pass
- 1pass -
* Direction *
F1 → UniDir.
- BiDir. -
* RepeatPrn *
F1 → Count
1passFew
4pass
(1/1)
Description
Over printing is not performed.
Only gaps between lines are overwritten.
Over-printing is performed twice per 1 line.
Over-printing is performed four times per 1 line.
[CANCEL] key: To shift to the previous menu.
Refer to Setup menu
BiDir.
(1/1)
Description
Prints in one direction.
Prints bi-directionally.
[CANCEL] key: To shift to the previous menu.
Refer to Setup menu
IntervalTime
(1/1)
Description
To set the number of repeats per line of printing.
Refer to 'Repeat times menu'
To set interval time for the repeat print.
Refer to 'Interval time menu'
[CANCEL] key: To shift to the previous menu.
Refer to Setup menu
106
Chapter 5 : Handling the printer
← F2
← F4
← F2
← F2
AP-75037, Rev. 1.1, 24/04/2006