Connecting The Printer To Your Pc; System Requirements; Selecting Cables - Oce CS9065 User Manual

4.8 CONNECTING THE PRINTER TO YOUR PC

Please find below some instructions how to connect the printer to your PC.

4.8.1 System requirements

To use your printer with the driver, you need a PC that complies with the following system requirements :
System OS
CPU
Memory (RAM)
Hard disk space
Notes :
•
•

4.8.2 Selecting cables

Connections :
This printer is compatible with following interfaces :
Centronics interface
Network interface
Cables :
The following cables are necessary to connect your printer to the computer. Prepare appropriate cables
according to the computer to be connected.
Centronics interface: Centronics interface cable
Network interface: 10BASE-T/100BASE-TX Ethernet cable that is compatible with both.
(Category 5)
For more information about the interfaces, see 8.3 Interface Specifications (page 199)
Windows 2000 / XP
Pentium IV 1 GHz or higher
512 MB or more
10 GB or more
The memory requirements may vary depending on the type of applications you are
using and the complexity of the document you want to print.
OCÉ recommends you to use a hard disk and RAM memory as large as possible.
68
Chapter 4 : Preparing for a job
AP-75037, Rev. 1.1, 24/04/2006