Turning The Power Off - Oce CS9065 User Manual

4.4.2 Turning the power OFF

Procedure (4 steps) :
Step 1 :
Verify the following regarding the operational condition of the unit :
•
There is no printing operation being performed.
•
The operation panel is in a normal status.
Step 2 :
Press the [POWER] key of the operation panel to turn the unit OFF.
Step 3 :
Following message is displayed for 3 seconds on the operation panel. (See below)
Notes :
•
Next of the procedure on next page.
If the [POWER] key on the operation panel has been pressed by mistake, press the
[POWER] key again while the following message is displayed. (See below)
Power OFF
47
Chapter 4 : Preparing for a job
AP-75037, Rev. 1.1, 24/04/2006