Adjust Heaters - Oce CS9065 User Manual

5.6.2.3 Adjust heaters

While printing, the heater values can be changed. For example: when noticing cockling.
Please follow the steps below to adjust the heater temperatures.
Step 1 : Go to the "Printing" menu in the menu structure.
Step 2 : Press the [F3] button when the following screen appears :
Step 3 : Following screens (see below) will be displayed :
Step 4 : Change the value of one or more heaters or turn them all off.
Note :
•
* Printing*
Dist.Adj.
F3 A: T B: T C: T D:T
Wait Init.
* Heaters *
F1 A:S50-T
F3
C:S40-T
Wait Init.
* Heaters *
F1 SET OFF
Wait Init.
For more details about heater adjustment, please refer to "Controlling the heater
elements on the CS9000 Eco-Solvent printer printer"
Cleaning
Heat Sys.
1/2
B:S40-T ← F2
D:S50-T ← F4
Heat Sys.
2/2
Heat Sys.
154
Chapter 5 : Handling the printer
End of the on-the-fly heaters adjust
AP-75037, Rev. 1.1, 24/04/2006