Cleaning Around The Print Head - Oce Eco Solvent CS9350 Manual

6.2.5

Cleaning around the print head

(1) Time for cleaning
When foreign substances such as dust or ink clump that can cause missing dots or ink leakage is attached
around the print head
(2) Cleaning procedures
NOTE
Before cleaning around the print head, read this procedure thoroughly to fully understand

it, and clean promptly and correctly.
While cleaning around the print head, the print head cap is removed, therefore cleaning

must be done before the print head dries.
This operation should be done within 15 minutes.
If the operation lasts over 15 minutes, follow the Steps 8 and 9 to stop the operation and
perform head cleaning, then resume cleaning.
6.2.3 Head cleaning
Use the cleaning stick to clean around the print head.

For details of the cleaning stick, refer to "8.3 Options/Supply list".
Step 1: If the printer is turned ON, make sure the following.
• Printing or other operations are not in progress.
• The operation panel display is Normal.
Step 2:
Display the CR Maintenance menu on the operation panel.
a. Press the [Menu] key on the operation panel.
• "Menu1: Setup>" is displayed on the operation panel.
• The operation panel shifts to the Setup menu display.
6-164
CS9350 User's Guide