Setup Menu; Roll Media Setup Menu; Roll Media Length Menu; Centronics Menu - Oce CS9065 User Manual

5.4.4 Setup menu 3/7

5.4.4.1 Roll Media setup menu

To perform various settings for roll media.
Setup items Parameters
Roll media setup Disable
Roll media 1
Roll media 2
Roll media 3
-

5.4.4.2 Roll media length menu

To set roll media length.
Setup items Parameters
Roll media 1-4 1 m to <30 m>to 99 m

5.4.4.3 Centronics menu

To set communication mode to Centronics interface.
Current parameter →
Setup items Parameters
Centronics Centronics
<Bi Centro>
-
* RollSetup *
F1 → Disable
F3 → Roll2
* Roll1 *
1 m – 99 m
F2, F4
* Centro. *
F1 → Centro.
- BiCentro. -
Roll1
Roll3
(1/1)
Description
Set this when roll media setup is not used.
For each setup value of roll media, 3 settings of "Roll
media 1" - "Roll media 3" can be set.
Refer to Roll media length menu
• [CANCEL] key: To shift to the previous menu.
Refer to Setup menu
+
30m -
→ ENTER
Description
To change roll media length by operating the
following keys.
• [F2] key: Increases the setup value.
• [F4] key: Decreases the setup value.
• [ENTER] key: Confirms the setup value, shifts to the
previous menu.
• [CANCEL] key: Cancels the setup value, shifts to
the previous menu.
Refer to Roll Media setup menu
BiCentro.
(1/1)
Description
To set communication mode to Centronics mode.
To set communication mode to Bi-Centronics mode.
To shift to the previous menu.
Refer to Setup menu
116
Chapter 5 : Handling the printer
← F2
← F4
← F2
← F4
← F2
AP-75037, Rev. 1.1, 24/04/2006