Fixer Menu; Post Fixer Menu; Drier Menu - Oce CS9065 User Manual

5.4.2.13 Fixer menu

Set the temperature of the Fixer.
Use the [F2] or [F4] key to select the requested temperature for the Fixer.

5.4.2.14 Post Fixer menu

Set the temperature of the Post Fixer.
Use the [F2] or [F4] key to select the requested temperature for the Post Fixer.

5.4.2.15 Drier menu

Set the temperature of the Drier.
Use the [F2] or [F4] key to select the requested temperature for the Drier.
Notes :
•
•
Caution :
•
* Fixer (B) *
OFF – 70°C
F2, F4
* Post Fixer (C) *
OFF – 70°C
F2, F4
* Drier (D) *
OFF – 50°C
F2, F4
The default setting for the drier is set to '50°C'.
The function of the drier (D) : Heating the printed transfer paper evaporates the
water fast enough so that the print is touch-dry when wound.
We recommend you to set the dryer temperature at 50°C. This to be sure that
transfer paper is touch-dry when wound.
+
70°C -
→ ENTER
+
70°C -
→ ENTER
+
50°C -
→ ENTER
99
Chapter 5 : Handling the printer
← F2
← F4
← F2
← F4
← F2
← F4
AP-75037, Rev. 1.1, 24/04/2006