Power On Cleaning Menu; Media Width Menu - Oce CS9065 User Manual

5.4.5.4 Power on cleaning menu

When cleaning should be performed automatically with the power is turned on.
Current parameter →
Setup items Parameters
Power on <Off>
cleaning
On
-

5.4.5.5 Media width menu

If media detection has not been performed during initialization, the width of the media is set here.
It can be set in the following ranges:
• 50" model: 210mm-1273mm
• 64" model: 210mm-1651mm
• 87" model: 210mm-2240mm
Notes :
On the media width menu,
•
•
Setup items Parameters
media width • 50" model: 210mm -
<841mm> - 1273mm
• 64" model: 210mm -
<841mm> - 1651mm
• 87" model: 210mm -
<841mm> - 2240mm
* OnCleaning *
F1 → OFF
- OFF -
If a value larger than the width of the media has been set, media or the product may
be contaminated by the ink during printing.
If a value smaller than the width of the media has been set, media may not be cut
correctly.
* Width *
210 mm – 1273 mm
F2, F4
ON
(1/1)
Description
Power on cleaning is not performed.
Power on cleaning is performed.
To shift to the previous menu.
Refer to Utility menu
+
841 mm -
→ ENTER
Description
To change media width by operating the following
keys.
• [F2] key: Increases the setup value.
• [F4] key: Decreases the setup value.
• [ENTER] key: Confirms the setup value, shifts to the
previous menu.
• [CANCEL] key: Cancels the setup value, shifts to
the previous menu.
Refer to Utility menu
122
Chapter 5 : Handling the printer
← F2
← F2
← F4
AP-75037, Rev. 1.1, 24/04/2006