Changing The Printer Status - Oce CS9065 User Manual

2.4.3 Changing the printer status

2.4.3.1 Changing the status from normal to the setting menu display
Press either [MENU
The display of the operation panel changes to the Setting menu display.
Note :
•
2.4.3.2 Changing the status from the setting menu display to normal
Execute one of the following actions when the printer is in the setting menu display to change the operation
panel display to normal one.
Press the [CANCEL] key on the operation panel.
Leave the printer 3 minutes (no printing) when the status is in the setting menu display.
[MENU ↑] or [MENU ↓]
Note :
•
] or [MENU ] on the operation panel when the printer is in normal status.
Refer to 5.4.1 Setup menu (page 89) for details of the setting menu.
Ready to print
Heaters
Cut&Feed
User 1
* SetupMenu *
InkStatus
TestPrint
Refer to 6.3.1 Status messages (page 167) for details of displaying the printer
status.
Cleaning
Lever Up
↓ ↑ [CANCEL] or leave the printer as it is
for 3 minutes
↓ ↑
OriginSet
MediaSet
23
Chapter 2 : Product Overview
xxxm
(1/7)
AP-75037, Rev. 1.1, 24/04/2006