Replacing The Sponge In The Spitting Box - Oce CS9065 User Manual

7.2.3.2 Replacing the sponge in the spitting box.

Note :
•
Procedure (5 steps) :
Step 1 : Go to the WiperClean menu and DON'T press enter when in it.
Going to the WiperClean menu will unlock the head
Step 2 : The carriage moves to the waiting position for replacing the flushing sponge.
Step 3 : Remove the old absorbents with tweezers. (See image below)
Next step on next page
Use gloves and tweezers to change the absorbent in the flushing box.
* WiperClean *
Changed Wiper?
1 = Sponge (code number 29801281)
2 = Tweezers
3 = Gloves
→ ENTER
181
Chapter 7 : Maintenance
AP-75037, Rev. 1.1, 24/04/2006