Step 4 :
Remove the waste liquid tank from the tank tray of the stand.
Note :
•
Step 5 :
Open the cap of a new waste liquid tank and put the tank to the printer.
Step 6 :
Press the [ENTER] key on the operation panel.
•
The printer returns to menu 6/7.
•
The printer returns to the normal status by pressing the [CANCEL] key
Put the used waste liquid tank in a plastic bag and follow the local regulations when
disposing.
Ready to print
Heaters
Cut&Feed
User1
Cleaning
Lever Up
xxxm
189
Chapter 7 : Maintenance
End of the procedure
AP-75037, Rev. 1.1, 24/04/2006