Oce CS9065 User Manual page 182

Step 4 : Install the new absorbents in the flushing box.
Note :
•
Step 5 : Close the front cover and press the [ENTER] key in the active display (=WiperClean menu)
The head will cap in and be locked.
Make sure that the 2 holes are on the right side of the flushing box and that the pins
of the black box are in the holes of the absorbent.
1 = Two holes
2 = Pin of black box
* WiperClean *
Changed Wiper?
→ ENTER
182
Chapter 7 : Maintenance
End of the procedure
AP-75037, Rev. 1.1, 24/04/2006