Connecting The Centronics Interface - Oce CS9065 User Manual

4.8.3 Connecting the Centronics interface

The procedure for connecting the Centronics interface is explained below.
To connect the printer to your computer, follow the steps below.
Procedure (3 steps) :
Step 1 :
Turn off the printer and your computer.
Step 2 :
Plug the cable connector of the interface cable into the interface connector at the back of the
printer. Squeeze the wire clips together until they lock into place.
Step 3 :
Plug the other end of the cable into the computer's port.
Note :
•
1 = Centronics interface connector
2 = Interface cable
Refer to your computer's manual for the procedure to connect your computer.
69
Chapter 4 : Preparing for a job
End of the connectiong procedure
AP-75037, Rev. 1.1, 24/04/2006