Unpacking; Packing Of The Product - Oce CS9065 User Manual

Océ CS9000 Eco-Solvent printer series

3.1 UNPACKING

Caution :
•
•

3.1.1 Packing of the product

The product is packed in 4 boxes, one for the main unit, one for the stand, and one with the
Unwinder / Winder 100, further named the UW/W 100. See table below.
No° Description
1 Main unit packaging box
2 Stand packaging box
3 UW/W 100 packaging box
4 Machine Starters Kit packaging box
3.1.2 Unpacking the main unit packaging box
The following procedure describes the unpacking of the main unit packaging box.
Procedure (4 steps) :
Step 1 :
Move the packaging of the main unit to the unpack-location.
Step 2 :
Remove the straps around the packaging box.
When unpacking, always work with at least 4 people.
When removing the printer or stand from the packaging box, always remove the
vinyl plastic, and hold on the side of the product. Holding the unit over the vinyl
plastic wrapping can result in slippage and dropping the unit, causing damage.
26
Operation instructions
Chapter 2 : Setting up the unit
Quantity
1
1
1
1
AP-75037, Rev. 1.1, 24/04/2006