Warning Labels; Handling The Warning Labels; Locations And Types Of Warning Labels; Location And Types Of Warning Labels On Front Part - Oce CS9065 User Manual

1.4 WARNING LABELS

The handling, attachment locations, and types of warning labels are explained below.
Warning labels are attached on areas which require attention. Read and understand the positions and
contents thoroughly before performing your work.

1.4.1 Handling the warning labels

Be sure to note the following when handling the labels.
Notes :
•
•
•

1.4.2 Locations and types of warning labels

The locations of warning labels are shown below.

1.4.2.1 Location and types of warning labels on front part.

Make sure that all labels can be recognized. If text or illustrations cannot be clearly
seen, either clean or replace the label.
When cleaning labels, use a cloth with water or neutral detergent. Do not use a
solvent or gasoline.
If a warning label is damaged, lost or cannot be recognized, replace the label.
When replacing warning labels, contact your local Océ representative.
11
Chapter 1 : Safety Instructions
AP-75037, Rev. 1.1, 24/04/2006