Océ CS9000 Eco-Solvent printer series
Step 3 :
Remove the top board (1) and take out the packaging material (2) at the right upper side and left
upper side as shown on the image below.
Step 4 :
Remove the outer boards and take out the accessory box and the packaging box of the waste
fluid tank.
1 = Top board
2 = Packaging material right upper side.
3 = Packaging material left upper side.
1 = Outer board
2 = Accessory box
27
Operation instructions
Chapter 2 : Setting up the unit
AP-75037, Rev. 1.1, 24/04/2006