Print Mode Check - Oce CS9065 User Manual

5.5.4 Print mode check

Use the following procedure to check the print mode currently set.
Step 1 : Press the [ENTER] key on the operation panel.
The following information is displayed on the operation panel for three seconds.
No. Position
1 Line 2
2 Line 3
3 Line 4
Step 2 : When the printing mode display closes, the product changes to its normal status.
* Printmode *
1 → Condition
2 →
Interlace
3 →
Direction
Description
The printing quality is displayed.
The interlace method is displayed.
The printing direction is displayed.
360x360
1pass
UniDir
Refer to 'Printing quality menu'
Refer to 'InterLace Setup menu'
Refer to 'Printing direction menu'
150
Chapter 5 : Handling the printer
Reference
End of the print mode check procedure
AP-75037, Rev. 1.1, 24/04/2006