Hstatus Menu; Media Feed Compensation Menu - Oce CS9065 User Manual

5.4.2.16 HStatus menu

Check the temperature of the heating elements.
Notes :
A stands for the Heater.
B stands for the Fixer.
C stands for the Post Fixer.
D stands for the Dryer.
Press the [CANCEL] key to go to the previous menu.

5.4.2.17 Media feed compensation menu

To perform various settings for media feed compensation
Notes :
•
Setup items Parameters
Dist.Adj Print1
Change
Print2
-
* HStatus *
A: 49 B: 26
Heating NOT Ready
For details of the media feed compensation, refer to "Media feed compensation".
* Dist. Adj *
F1 → Print 1
F3 →
Print 2
Description
Performs printing by media feed compensation.
A correction pattern with a width of ± 0.20% (in steps of 0.10 %) is
printed around the center of the correction value currently set.
Refer to Printing by Media feed compensation menu
Changes the media feed compensation value.
The menu changes to the Change Media Feed Correction Value menu.
Refer to Change media feed compensation value menu
Performs printing by media feed compensation (for fine adjustment).
A correction pattern with a width of ± 0.02% (in steps of 0.01%) is
printed around the center of the correction value currently set.
Refer to Printing by Media feed compensation menu
[CANCEL] key: Shifts to the previous menu.
Refer to User media menu
C: 27 D : 49
Change
(1/1)
100
Chapter 5 : Handling the printer
← F2
AP-75037, Rev. 1.1, 24/04/2006