Table of Contents
Advertisement
Parts needed:
Before powering ON the unit for the first time, please be sure to have:
•
8 cassettes with Eco-Solvent Cleaning
•
8 cassettes with Eco-Solvent ink (2 x CMYK)
First ink load procedure:
Step 1 :
Verify if the Waste bottle is empty.
Step 2 :
Power ON the unit.
Step 3 :
Remove all dummy cassettes as indicated on the display.
The CS9000 Eco-Solvent printer will start pumping air for about 15 seconds.
Step 4 :
The following message will be displayed.
Step 5 :
The head will be unlocked. Moisten the caps with Eco-Solvent Cleaning Liquid.
Step 6 :
Install the 8 NEW Eco-Solvent Cleaning cassettes (2) as requested on the display. See images
below.
The display will show the remaining minutes, 9 min for a 65" machine and 13 min for a 90" machine:
Please note that you have to wait 1 minute if the display mentions 0 minutes:
1. Moisten Caps
2. Insert new STL
[ALL]
Ink refill
rest 13 min
Ink refill
rest 0 min
50
Chapter 4 : Preparing for a job
(or 9 min for 65" machines)
AP-75037, Rev. 1.1, 24/04/2006
Advertisement
Chapters
Table of Contents
