Operating The Pressure Rollers - Oce CS9065 User Manual

5.5.3 Operating the pressure rollers

When you want to switch the up and down movement of the pressure rollers follow the instructions below.
Press the [F4] key on the operation panel.
The printer works as follows.
Status of the printer
• The pressure rollers have been lowered
• The MEDIA SET lamp turns off.
• The pressure rollers have been raised.
• The MEDIA SET lamp turns on (orange).
Notes :
•
Ready to print
Heaters
Cut&Feed
User1
• The pressure rollers are lifted
• The MEDIA SET lamp will turn on (orange).
• The pressure rollers are lowered.
• The MEDIA SET lamp will turn off.
You can also switch the up and down movement of the pressure rollers using the
foot switch instead of the operation panel. (Picture below)
1 = Foot switch
Cleaning
LeverUp
xxxm
Operation after the [F4] key has been pressed
149
Chapter 5 : Handling the printer
← F4
AP-75037, Rev. 1.1, 24/04/2006