Check The Wiper Blade For Contamination And Replenish Wiper Cleaning Liquid - Oce CS6410 Basic Operation Manual

Check the wiper blade for contamination and replenish wiper cleaning liquid

1
2
Wiper blade
3
Cleaning liquid port
Wiper cleaning liquid
4
58
Océ CS6410 Basic Operation Guide
Wiper blade
Liquid level
Open the front cover, and then open the wiping
cover.
Visually check the wiper blade for
contamination and scratches.
NG NG
NG
If the wiper blade is stained or scratched, replace it.
See "Replace a wiper blade" on page 88.
Check the wiper cleaning liquid level.
Check that the cleaning liquid supply hole is at the top
face's lower right of the wiping unit.
When the cleaning liquid level is lower than
the " " mark's top edge, replenish the wiper
cleaning liquid.
Replenish the liquid so that the cleaning liquid level is lower
than the " " mark's top edge.
Close the wiping cover and the front cover.
CAUTION
- Be sure to unlock the stopper before closing the wiping
cover. If you try to close the wiping cover without
unlocking the stopper, the stopper may bend, or the bent
stopper may touch the carriage, which may damage the
Printer.
NG NG
NG