Required Space - Oce CS9065 User Manual

Notes :
•
•

3.4.1.2 Required space

Install the product on a flat surface that fulfills following conditions (See below)
a = 1500mm
b = 1500mm
c = 2500mm
d = 600mm
e = 1250mm
Avoid the following temperature and humidity conditions. Otherwise, printed
images may appear differently from what you expect:
Places where sudden changes in temperature and humidity are expected,
o
even though the condition is within the range written above.
Places where direct sunlight or excessive lighting are experienced.
o
Places where air conditioners blow directly.
o
OCÉ recommends that the printer should be installed in a place where air
conditioning can be adjusted easily.
38
Chapter 3 : Setting up the unit
AP-75037, Rev. 1.1, 24/04/2006