Mounting The Main Unit To The Stand - Oce CS9065 User Manual

3.3.2 Mounting the main unit to the stand

The procedure below describes how to mount the main unit to the stand, assembled in the previous chapter.
Parts and Tools :
No° Description
1 Stand
2 Main unit
3 Hexagon socket head cap screw (M6 x 16)
4 Hexagon wrench 5mm
Procedure (3 steps) :
•
Place the stand with its weight supports on the floor.
•
Lift up the main unit (2) with at least four persons by holding it by the handles (3) and place it on the
stand (1). See image below.
•
Tighten the hexagon socket head cap screws (1) to fix the stand as shown on the image below.
1 = Stand
2 = Main unit
3 = Handle
1 = Hexagon socket head cap screw (M6 x 16)
2 = Stand
3 = Main unit
33
Chapter 3 : Setting up the unit
Quantity
AP-75037, Rev. 1.1, 24/04/2006
1
1
8
1