3.3 ASSEMBLING THE UNIT
Caution :
•
3.3.1 Assembling the stand
Parts and tools :
No°
Description
1
Weight support
2
Stay
3
Hexagon socket head cap screws M6 x 30
4
Hexagon wrench 5mm
Procedure (2 steps) :
Step 1 :
Place the stay upside down.
Step 2 :
Install the weight supports (2) to the stay (1) as shown on the image below.
When assembling this product, always work with at least 4 people.
1 = Stay
2 = Weight support
3 = Hexagon socket head cap screw (M6 x 30)
32
Chapter 3 : Setting up the unit
Quantity
AP-75037, Rev. 1.1, 24/04/2006
2
1
8
1